Car heating warm-up system for Toyota RAV4 III (A3) 01.2006 - 02.2009
Car heating warm-up system for Toyota RAV4 III (A3)
- Standard catalogue
- New catalog (6 products)
Power:
Dimensions:
Lenght:
All filters
Power consumption:
Connector diameter:
6 products more in new catalogue
NB! 6 more products found in the new catalog
Results found: 10
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
Item code:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
157.50-12%137.84 eur -
-
157.50 - Price with discount
- 137.84 eur
-
- You save 19.66 eur (-12%)
-
- in the store
- 2 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
Item code:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
29.33-13%25.46 eur -
-
29.33 - Price with discount
- 25.46 eur
-
- You save 3.87 eur (-13%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
READ MORE |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
Item code:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
37.50 eur
- Price: 37.50 eur
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
READ MORE
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
Item code:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
138.75-12%122.29 eur -
-
138.75 - Price with discount
- 122.29 eur
-
- You save 16.46 eur (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
Item code:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
149.17-14%128.29 eur -
-
149.17 - Price with discount
- 128.29 eur
-
- You save 20.88 eur (-14%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | ALL PROPERTIES |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
Item code:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
155.83-12%136.38 eur -
-
155.83 - Price with discount
- 136.38 eur
-
- You save 19.45 eur (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
Item code:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
157.17-12%138.69 eur -
-
157.17 - Price with discount
- 138.69 eur
-
- You save 18.48 eur (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | ALL PROPERTIES |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
Item code:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
164.83 eur
- Price: 164.83 eur
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
READ MORE
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
Item code:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
188.33-5.9%177.21 eur -
-
188.33 - Price with discount
- 177.21 eur
-
- You save 11.12 eur (-5.9%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- Add to cart
READ MORE
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Cable Kit, engine preheating system CALIX 1762461
Item code:
AL72276912
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
75.40 eur
- Price: 75.40 eur
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- To the new catalogue
See item information in the new catalogue
Cable Set, interior heating fan, (engine preheating system) CALIX 1760025
Item code:
AL72272342
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
84.05 eur
- Price: 84.05 eur
-
- can be ordered
- 5 pcs
-
date of dispatch:
02.06.2024, 18:00
- To the new catalogue
See item information in the new catalogue
Cable Kit, engine preheating system DEFA 460785
Item code:
AL12650829
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
78.56 eur
- Price: 78.56 eur
- in suppliers stock: NOT AVAILABLE
- To the new catalogue
See item information in the new catalogue
ENGINE HEATER TT-THERMO 1500KLD
Item code:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
117.50 eur
- Price: 117.50 eur
- in suppliers stock: NOT AVAILABLE
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | ALL PROPERTIES |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Heating systems for Toyota RAV4 III (A3)
All parts for Toyota RAV4 III (A3)
- Body parts
- Bumper
- Under engine cover
- Wing
- Plastic inner fender
- Bumper grill
- Grill
- SillNEW!
- Bumper bracket
- Rear wheel archNEW!
- Bonnet
- Tow hook
- Front panel
- Towing hook plug
- Bumper moulding
- Bumper reinforcement
- Brake dust shield
- Headlamp frameNEW!
- Fender mouldingNEW!
- Sill repair part
- Door mouldingNEW!
- Door HingeNEW!
- Fog lamp frame
- Bonnet hingeNEW!
- Under engine and gearbox cover (steel)
- Bottom protection
- Head lamp seat
- Crossmember
- Rear panelNEW!
- Trailer HitchNEW!
- Front panel upper moulding
- Lower front panel
- Mounting Kit, bumperNEW!
- Mounting Kit, bonnetNEW!
- DeletedNEW!
- Number plate base
- Protective foil
- Lighting
- Main headlamp
- Tail light
- Side flasher
- Front fog lamp
- Reflective element
- IndicatorNEW!
- Stop lamp
- BallastNEW!
- Bulb, door puddle lightNEW!
- Side flasher in mirror
- Headlamp motor
- Rear fog lamp
- Cable Repair Set, headlightNEW!
- Fog lamps with blendesNEW!
- Front fog lamp blendeNEW!
- Reflector, position-/marker lightNEW!
- Bulb, reading lightNEW!
- Cable Repair Set, fog lightNEW!
- Bulb
- Marker lights universal
- Universal tail light
- Tuning parts
- Mirrors and connected parts
- Braking systems
- Brake padsNEW!
- Brake discNEW!
- Repair Kit, brake caliperNEW!
- Brake CaliperNEW!
- Brake shoes kit, drum brakesNEW!
- Cable, parking brakeNEW!
- Guide Sleeve Kit, brake caliperNEW!
- Brake HoseNEW!
- Repair kit, brake padsNEW!
- Brake Master CylinderNEW!
- Brake Light SwitchNEW!
- Brake shoes repair kitNEW!
- Piston, brake caliperNEW!
- Repair Kit, automatic adjustmentNEW!
- Sensor Ring, ABSNEW!
- Repair Kit, brake master cylinderNEW!
- Vacuum Pump, brake systemNEW!
- Brake Set, disc brakesNEW!
- Repair Kit, wheel brake cylinderNEW!
- Brake AdjusterNEW!
- Holding Bracket, brake hoseNEW!
- Anti-Squeal Foil, brake pad (back plate)NEW!
- Cable, service brakeNEW!
- Steering parts
- Control arm
- Stabilizer linkNEW!
- Tie rod endNEW!
- Control arm ball jointNEW!
- Control arm silentblockNEW!
- Stabilizer mountNEW!
- Axial jointNEW!
- Steering rack
- Steering bootNEW!
- Sway Bar, suspensionNEW!
- Camber Correction ScrewNEW!
- Suspension beamNEW!
- Steering gaiters setNEW!
- Anti-roll Bar Stabiliser KitNEW!
- Mounting, shock absorbersNEW!
- Suspension repair kitNEW!
- Rod/Strut, wheel suspensionNEW!
- Mounting, differentialNEW!
- Tie Bar BushNEW!
- Fastening Bolts, control armNEW!
- Sleeve, control arm mountingNEW!
- Steering ShaftNEW!
- Caster Shim, axle beamNEW!
- Joint, steering columnNEW!
- Mounting, axle beamNEW!
- Bush, kingpinNEW!
- Electrical parts
- Spark PlugNEW!
- Abs sensor
- Fuel pumpNEW!
- Ignition coilNEW!
- Crankshaft position sensorNEW!
- Sender Unit, coolant temperatureNEW!
- AlternatorNEW!
- Lambda sensors
- StarterNEW!
- Medalion (version USA)
- Parking sensor
- Sender Unit, oil pressureNEW!
- Air flow sensor
- Boost pressure sensorNEW!
- Brake Light SwitchNEW!
- Alternator RegulatorNEW!
- Switch, reverse lightNEW!
- Clockspring, airbagNEW!
- Sender Unit, intake air temperatureNEW!
- Sensor, exhaust pressureNEW!
- Sensor, exhaust gas temperatureNEW!
- Knock SensorNEW!
- Potentiometer throttle valveNEW!
- Sensor, speedNEW!
- Holder, carbon brushesNEW!
- Sensor, speed / RPMNEW!
- High pressure pumpNEW!
- Solenoid Switch, starterNEW!
- Freewheel Gear, starterNEW!
- Relay, wipe-/wash intervalNEW!
- RPM Sensor, automatic transmissionNEW!
- Electric Kit, towbarNEW!
- Water Pump, window cleaningNEW!
- Hazard Lights RelayNEW!
- Plug, coilNEW!
- Rectifier, alternatorNEW!
- Pulley, alternatorNEW!
- Shift Valve, automatic transmissionNEW!
- Glow Plug, auxiliary heaterNEW!
- Switch, brake actuation (engine timing)NEW!
- Air Flow SensorNEW!
- Control Unit, electric fan (engine cooling)NEW!
- Reverse Camera, parking assistNEW!
- Mounting Kit, engine preheating systemNEW!
- Control Unit, pneumatic suspensionNEW!
- Assortment, plug housings
- Batteries for garden equipment
- Battery booster/Jump starter
- Battery charger
- Battery testers & chargers
- Car battery
- Daylight (universal lamps)
- Electrical appliances
- Fuses set
- Inverter
- Jumper cables
- Recreational vehicle batteries
- Sender Units/ Sensors
- Thermical parts
- ThermostatNEW!
- Radiator
- Water PumpNEW!
- Interior blower
- AC condenser
- Radiator HoseNEW!
- Radiator capNEW!
- Expansion tankNEW!
- Heat blower controllerNEW!
- AC compressorNEW!
- Radiator fan
- Heater
- Intercooler
- Oil cooler
- Oil cap
- Coolant TubeNEW!
- Pressure Switch, air conditioningNEW!
- DrierNEW!
- Magnetic Clutch, air conditioner compressorNEW!
- Evaporator
- Gasket, thermostatNEW!
- Mounting, radiatorNEW!
- Expansion valveNEW!
- Gasket, thermostat housingNEW!
- Seal, EGR valveNEW!
- Control unit
- Gasket, water pumpNEW!
- Gasket, coolant flangeNEW!
- AntifreezeNEW!
- Heating Element, engine preheater systemNEW!
- Pressure switch
- Breather Screw/Valve, radiatorNEW!
- Flange
- Air conditioning bearing
- Oring set
- R134a
- Engine
- Oil Drain Plug, oil panNEW!
- Gasket, cylinder head coverNEW!
- Gasket, cylinder headNEW!
- Shaft Seal, crankshaft, Shaft Seal, camshaftNEW!
- Gasket Set, cylinder headNEW!
- Timing Chain KitNEW!
- Bolt Kit, cylinder headNEW!
- Gasket, intake manifoldNEW!
- Charger Intake HoseNEW!
- Gasket Set, cylinder head coverNEW!
- Gasket, exhaust manifoldNEW!
- Piston Ring KitNEW!
- Belt Pulley, crankshaftNEW!
- Seal Set, valve stemNEW!
- Mounting Kit, chargerNEW!
- Exhaust ValveNEW!
- Valve, engine block breatherNEW!
- Inlet ValveNEW!
- Gasket Set, crank caseNEW!
- Oil PumpNEW!
- Cylinder Head CoverNEW!
- Rocker/ TappetNEW!
- Control Valve, camshaft adjustmentNEW!
- Sump
- Full Gasket Set, engineNEW!
- Seal, valve stemNEW!
- Pressure Converter, exhaust controlNEW!
- Valve GuidesNEW!
- Timing ChainNEW!
- Tensioner, timing chainNEW!
- Gasket, intake manifold housingNEW!
- Seal, oil filter housingNEW!
- Gasket, thermostatNEW!
- Finger Follower, engine timingNEW!
- Camshaft AdjusterNEW!
- Seal, oil filler capNEW!
- Cooler, exhaust gas recirculationNEW!
- Shaft Seal, camshaftNEW!
- Conrod Bearing SetNEW!
- Seal, oil pumpNEW!
- Chain, oil pump driveNEW!
- Rocker Arm, engine timingNEW!
- Guides, timing chainNEW!
- Crankshaft Bearing SetNEW!
- Gear, crankshaftNEW!
- Gasket, block cover (crankcase)NEW!
- Thrust Washer, crankshaftNEW!
- Sealing Ring, spark plug shaftNEW!
- CHRA Cartridge, chargerNEW!
- Gasket, intake/ exhaust manifoldNEW!
- Gear, camshaftNEW!
- Bolt Set, crankshaft pulleyNEW!
- Tensioner Guide, timing chainNEW!
- Timing CaseNEW!
- Accessory Kit, finger followerNEW!
- Shaft Seal, camshaftNEW!
- Rocker Arm Set, engine timingNEW!
- Lubricating Pipe, cam lubricationNEW!
- Seal Ring, O-Ring, cylinder linerNEW!
- Seal, turbine inlet (charger)NEW!
- Non-return ValveNEW!
- Seal, oil strainerNEW!
- Gear, oil pumpNEW!
- Bolt, flywheel ring gear carrierNEW!
- Tensioner Guide, oil pump drive chainNEW!
- Drive system parts
- Wheel bearing kitNEW!
- CV-jointNEW!
- Axle shaftNEW!
- CV-joint bootNEW!
- Shaft Seal, differentialNEW!
- Seal, drive shaftNEW!
- Bearing, propshaft centre bearingNEW!
- Shaft Seal, wheel hubNEW!
- Shaft Seal, manual transmissionNEW!
- Stub Axle, wheel suspensionNEW!
- Tripod Hub, Drive shaftNEW!
- Drive ShaftNEW!
- Bearing, drive shaftNEW!
- Joint, steering shaftNEW!
- Intermediate Bearing, drive shaftNEW!
- Universal JointNEW!
- Shaft Seal, transfer caseNEW!
- Oil, all-wheel-drive couplingNEW!
- Holder, propshaft centre bearingNEW!
- Oil Seal, manual transmissionNEW!
- Belts and pulleys
- V-ribbed beltNEW!
- Tensioner Pulley, timing beltNEW!
- Deflection/Guide Pulley, v-ribbed beltNEW!
- Tensioner Lever, v-ribbed beltNEW!
- V-Ribbed Belt SetNEW!
- Alternator pulley
- V-BeltNEW!
- Vibration Damper, v-ribbed beltNEW!
- Deflection/Guide Pulley, v-beltNEW!
- Belt Pulley Set, crankshaftNEW!
- Repair Kit, v-ribbed belt tensionerNEW!
- Engine, transsmision and drive system mountings
- Car interior equipment
- Window regulators
- Air intake system parts
- Mounting Kit, chargerNEW!
- Charger, charging system
- Throttle bodyNEW!
- Seal, turbo air hoseNEW!
- Gasket, chargerNEW!
- Intake Manifold ModuleNEW!
- Oil Pipe, chargerNEW!
- CHRA Cartridge, chargerNEW!
- Assembly Paste, diesel injector / glow plugNEW!
- Threaded Bolt, chargerNEW!
- Control Valve, compressorNEW!
- Sensor, differential pressureNEW!
- Repair Kit, chargerNEW!
- Exhaust System
- End SilencerNEW!
- Middle SilencerNEW!
- Gasket, exhaust pipeNEW!
- Rubber Strip, exhaust systemNEW!
- Exhaust PipeNEW!
- Catalytic ConverterNEW!
- Mounting Kit, chargerNEW!
- Seal, exhaust pipeNEW!
- Soot/Particulate Filter, exhaust systemNEW!
- Bolt, exhaust systemNEW!
- Rubber Buffer, silencerNEW!
- Seal, oil outlet (charger)NEW!
- Spring, silencerNEW!
- CHRA Cartridge, chargerNEW!
- Spring, exhaust pipeNEW!
- Mounting Kit, exhaust systemNEW!
- Valve, EGR exhaust controlNEW!
- Change-Over Valve, exhaust-gas doorNEW!
- Cable Repair Set, EGR valveNEW!
- Pressure Pipe, pressure sensor (soot/particulate filter)NEW!
- Fuel system parts
- Fuel cap
- EGR ValveNEW!
- Fuel tank
- Diesel InjectorNEW!
- Sensor, fuel pressureNEW!
- Throttle bodyNEW!
- Seal Ring, nozzle holderNEW!
- Sensor, exhaust gas temperatureNEW!
- Knock SensorNEW!
- Filler Pipe, fuel tankNEW!
- Seal Ring, injectorNEW!
- Pressure Converter, exhaust controlNEW!
- Pressure Control Valve, common rail systemNEW!
- Seal Kit, injector nozzleNEW!
- Control Valve, fuel quantity (common rail system)NEW!
- Air Pressure Sensor, height adaptationNEW!
- Fuel filler neck
- Fastening bindings
- Fuel PumpNEW!
- Fuel filler neck
- Work-shop equipment
- Other
- Gasket / SealNEW!
- Engine OilNEW!
- WindscreenNEW!
- Holding BracketNEW!
- Slack AdjusterNEW!
- Side WindowNEW!
- Rear WindscreenNEW!
- Gasket, manual transmission housingNEW!
- Automatic Transmission OilNEW!
- Actuator, injector pumpNEW!
- Automatic Transmission OilNEW!
- Spacer BushNEW!
- Supplementary SpringNEW!
- Seal, oil inlet (charger)NEW!
- Reflector, headlightNEW!
- Cover, brake caliperNEW!
- Oilfilter SpannerNEW!
- Gear Set, oil pumpNEW!
- Mounting Tool Set, clutch/ flywheelNEW!
- Exhaust Gas DoorNEW!
- Control Unit, pneumatic suspensionNEW!
- Access ramps
- Air/Electric Horn
- Battery Post Clamp
- Carry Case
- Cover, battery post clamp
- Earth Cable, distributor
- Hand Feed Pump
- Miscellaneous
- Vehicle combination paint
- Wire Brush, battery post/clamp cleaning
- Gas springs
- Heating systems
- Auto chemicals
- Universal bearings
- Chemistry and cosmetic care products
- Accessories
- Accesories for bikes
- Accessories
- Accessories for mobile phones
- All for bicycles
- BOOSTER, Emergency Aid - Battery Bank
- Band hawser
- Batteries
- Boat accessories
- Cables for securing cargo
- Car cameras
- Car covers
- Car flags
- Car kitchen
- Car seat covers
- Children cars
- Children's cars
- Children's goods
- Cigarette Lighter
- Clamps and ties
- Coffee machines, kettles
- Covers for car documents
- Decorations (hanging gadgets, stickers, flags)
- Elastic ropes for cargo fastening
- Fan for car
- Fefrigerators and cooling boxes
- Fire extinguisher
- First aid kit
- Flashlights, lamps
- Funnels
- Gas-cooker
- Heated seats
- Ice scraper
- Indicators
- Inner tubes
- Insulating Tape
- Interior freshener
- Key Ring Set
- Kit for technical inspection
- Lamps
- Lamps LED
- Lights XENON
- Load cover 4x5m 75g
- Mobile phone charger- powerbank
- Mobile phone holders
- Moisture absorbers
- Multimedia
- Parking assistant system
- Parking clock
- Petrol can
- Pets
- Pillows for the head
- Radio
- Reflective plate
- Roof Box
- Roof Rack
- Roof rack mounts
- Rotating Beacon
- Rudder cover
- Safety Goggles
- Soap
- Spade
- Speakers and cables
- Sponge
- Sticker
- Stickers and car identification
- Storage of clothes/ holders/ organizers
- Tape
- Tint films for car
- Tow Ball Bracket , towbar
- Vacuum Cleaners
- Vehicle Washing Brush
- Warn jacket
- Warning triangle
- Winches
- Wipes
- You may also like
- Heating systems
- Car heating warm-up system
- Car heating warm-up system for Toyota